10 Disc Magnets 12x2 mm N42 in PVC For Sewing
Magnetladen
6,50 €*
Article number:
S-12x02-PVC-Stl-10
Downloads
Product information "10 Disc Magnets 12x2 mm N42 in PVC For Sewing"
Disc magnet 12x2 mm with a holding force of almost 1.7 kg.
This magnet is fixed in PVC to enable sewing of the magnet more easily. Fixed in steel pot, therefore stronger at open side, magnet blocked at closed side. Sold only in sales units of 10 pcs = 5 pairs.
| Article number: | S-12x02-PVC-Stl-10 |
|---|---|
| Coating: | NiCuNiZn (zinc) |
| Determination of holding force: | Holding force measured on constructional steel (min. 10 mm). Other metallic bonding surfaces or influences (e.g. air humidity, dust, vertical position, outdoor use) might reduce holding force. 1 kg ≈ 10 Newton. |
| Diameter (D): | ~ 12 mm |
| Grade of magnetization: | N42 |
| Handling: | Magnets can break or shatter in an uncontrolled collision. |
| Height (H): | ~ 2 mm |
| Holding force: | ~ 1,7 kg |
| Material: | NdFeB and steel |
| Max. op. temperature: | ~ 80°C (magnet only) |
| Net Weight: | ~ 2,2 g |
| Safety information: | This is not a toy. Inappropriate use might cause injury. |
| Tolerance: | ± 0.1 mm |