Block Magnet 10x10x1 mm N45 Nickel
0,43 € *
0,43 €*
0,39 €*
0,35 €*
Product information "Block Magnet 10x10x1 mm N45 Nickel"
Block magnet 10x10x1 mm in magnetisation N45.
This magnets is used for holding demands as well as for electric circuit requirements. It belongs to the group of "model making classics", magnetised highest possibly to have as much force as possible at small place. This magnet is helpful to all sectors of fine mechanics.
| Article number: | Q-10x10x01-Nd-Ni |
|---|---|
| Coating: | NiCuNi (nickel) |
| Determination of holding force: | Holding force measured on constructional steel (min. 10 mm). Other metallic bonding surfaces or influences (e.g. air humidity, dust, vertical position, outdoor use) might reduce holding force. 1 kg ≈ 10 Newton. |
| Grade of magnetization: | N45 |
| Handling: | Magnets can break or shatter in an uncontrolled collision. |
| Height (H): | ~ 1 mm |
| Holding force: | ~ 800 g |
| Length (L): | ~ 10 mm |
| Material: | NdFeB (neodymium) |
| Max. op. temperature: | ~ 80°C |
| Net Weight: | ~ 0,8 g |
| Safety information: | This is not a toy. Inappropriate use might cause injury. |
| Special Information: | Please take care: Flat magnets of less than 2 mm thickness easily break or shatter due to this flat shape. |
| Tolerance: | ± 0.1 mm |
| Width (B): | ~ 10 mm |
Ähnliche Artikel
-
From 10 piece(s)0,30 €*
-
From 50 piece(s)0,27 €*
-
From 100 piece(s)0,24 €*