Disc Magnet 10x3 mm N44SH - heatenable up to 150°C
0,78 € *
0,78 €*
0,70 €*
0,65 €*
Product information "Disc Magnet 10x3 mm N44SH - heatenable up to 150°C"
Disc magnet 10x3 mm nickel, heat-resistant up to 150°C
Very special characteristic: Usually neodymium magnets are heatenable up to 80°C. If heatened higher NdFeB-magnets loose their holding force. In comparison to NdFeB ferrite magnets are heat-resistant up to 250°C but their holding force is week. AlNiCo is heat-resistant up to 400°C but expensive. So we offer some standard size neodymium discs in magnetisation N44SH which is heat-resistant up to 150°C.
| Article number: | S-10x03-NdSH-Ni |
|---|---|
| Coating: | NiCuNi (nickel) |
| Determination of holding force: | Holding force measured on constructional steel (min. 10 mm). Other metallic bonding surfaces or influences (e.g. air humidity, dust, vertical position, outdoor use) might reduce holding force. 1 kg ≈ 10 Newton. |
| Diameter (D): | ~ 10 mm |
| Grade of magnetization: | N44SH |
| Handling: | Magnets can break or shatter in an uncontrolled collision. |
| Height (H): | ~ 3 mm |
| Holding force: | ~ 2 kg |
| Material: | NdFeB (neodymium) |
| Max. op. temperature: | ~ 150°C (!) |
| Net Weight: | ~ 1,8 g |
| Safety information: | This is not a toy. Inappropriate use might cause injury. |
| Special Information: | This neodymium magnet can be heatened up to 150°C almost as twice as high as standard neodymium magnets. |
| Tolerance: | ± 0.1 mm |