Ring Magnet 10x4x5 mm N42 Nickel
0,72 € *
0,72 €*
0,66 €*
0,60 €*
Product information "Ring Magnet 10x4x5 mm N42 Nickel"
Ring magnets are usually magnetised axially (please see technical drawing); if you need a different way of magnetisation in most cases this won't be a standard magnet. Ring magnets are available without and with countersink. Please note: Ring magnets which are very flat or have a wide inner diameter (or both) might sliver or shatter easily. Please handle with care.
| Article number: | R-10x04x05-Nd-Ni |
|---|---|
| Coating: | NiCuNi (nickel) |
| Counterbore: | no |
| Determination of holding force: | Holding force measured on constructional steel (min. 10 mm). Other metallic bonding surfaces or influences (e.g. air humidity, dust, vertical position, outdoor use) might reduce holding force. 1 kg ≈ 10 Newton. |
| Grade of magnetization: | N42 |
| Handling: | Magnets can break or shatter in an uncontrolled collision. |
| Height (H): | ~ 5 mm |
| Holding force: | ~ 2,1 kg |
| Inner diameter (ID): | ~ 4 mm |
| Material: | NdFeB (neodymium) |
| Max. op. temperature: | ~ 80°C |
| Net Weight: | ~ 2,5 g |
| Outer diameter (AD): | ~ 10 mm |
| Safety information: | This is not a toy. Inappropriate use might cause injury. |
| Tolerance: | ± 0.1 mm |